DRIFTCROWN


Welcome to the DRIFTCROWN community
 
HomeCalendarGalleryFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 Rusty - 1985 Supra Turbo

View previous topic View next topic Go down 
AuthorMessage
kmfdmk



Posts : 3
Join date : 2012-02-22
Location : Tigard, OR

PostSubject: Rusty - 1985 Supra Turbo   Wed Feb 22, 2012 10:44 pm

1985 Toyota Supra, with 7M-GTE

Mods: (All other than machine work done by myself with the help of my buddy James, in Vancouver, WA and my fellow buddies in Touge Spec)

88 7M-GTE block
Bored .020 (20 thousandths over)
Honed & Polished
Decked Block
Magnafluxed Block
Stock 88 head
Dye checked for cracks etc
Port & Polish exhaust side
Short-Turn radii removed on intake side
Intake port matched
Titan Motorsports 1.4mm Metal Head Gasket
Crank Scraper

Stock Exhaust Manifold Port Matched to the Head and polished up (esp where the exhaust flows across the divider and into the turbo).

Eagle Forged Rods
CP Forged Pistons
Stock Crank Magnafluxed, then Knife-Edged (removing about 1.5 -> 2 lbs)
Micropolished journals
Teardropped oil passageways
Undersized Bearings
Intercooler, crossflow Spearco style, 24"x12"x3" w/ 3" inlet/outlet
2.5" Intercooler piping
3" Exhaust w/ matching 3" custom fabbed downpipe
Aeromotive FPR Kit (from Driftmotion)
CT-26 .57 trim (from Driftmotion)
Tial Knockoff BOV
MAFT-Pro (Stock ECU O2 Input clipped, in Open Loop 24/7)
550cc Siemens Deka Injectors
Walbro 255lph pump
11lb XTD Flywheel
Mocal Oil Thermostat
B&M Oil Cooler
Remote Dual Oil Filters
Custom 2-piece drivshaft
R154 transmission
Rebuilt 4.30 LSD
Stock Radiator
Stock Fans
Fully ducted Intercooler and Oil Cooler
K-Sport Hydraulic E-Brake
Momo Wheel (from 1984)

Tuned by myself @ RRev in Portland, OR.

Addco Rear Sway Bar
KYB AGX 4 way adj. on Front
Eibach 500lb Springs on Coil Overs up front
T3 Camber Plates
T3 Needle Bearings
T3 30mm Roll Center Adjusters
PolyPro Sway Bar Endlink Bushings on Front & Rear
KYB AGX 8 way adj. on Rear
Eibach 400lb Springs on Adj. Spring Perch's on Rear

Suspension Stuff to be installed:
Full Poly-Pro Bushing Kit (Control Arms F+R, Sub-frame bushings etc etc), and shorter steering arms for more angle.


Participated in Auto-X for the last 5 years or so, participated in Rally-X events in 2007, participated in the 2007 AKA Rally (3000+ mile cross-country road rally-(it's-not-a-race *wink*). For 2007 the AKA Rally was my honeymoon, raced my then-stock 5M-GE Supra on the Bonneville Salt Flats, only got 118mph though. Participated in multiple Drift events @ Portland Internation Raceway (PIR), participated in the NW Toy Run '08, and various Cascade Sports Car Club TSD (Time, Speed, Distance) road rallies. Also worked pit crew/mechanic for Coomes in the PRO AM circuit of Formula D in his Vegas & Evergreen events (can only get so much time off work), also done pit crew work for Formula Mazda stuff. Last summer I helped instruct at the SCCA Drift School @ Packwood.













Old Dyno Sheet, numbers, and fuel maps have changed.
Back to top Go down
View user profile
Admin
Admin


Posts : 24
Join date : 2011-09-20

PostSubject: Re: Rusty - 1985 Supra Turbo   Fri Feb 24, 2012 12:25 am

Hey guys, just wanted to let you know we have set up a new forum that we'll be using instead of this one. Head over to www.DriftCrown.com and sign up! kmfdmk I transfered this post to the new forum, so you wont have to repost all the info and pictures Wink
Back to top Go down
View user profile http://fpdriftcrown.forumotion.com
kmfdmk



Posts : 3
Join date : 2012-02-22
Location : Tigard, OR

PostSubject: Re: Rusty - 1985 Supra Turbo   Fri Feb 24, 2012 3:29 am

Would you like some help working with the wordpress website and forums? I used to do web design, professionally, like as in paid my meals & rent by doing it. I used to work with Jared & Hybrid Industries (they did PSI's, Andrew Coomes', and Peter Taylors website to name a few).

I just tried to log into the forums over on the official DriftCrown.com domain... (which loads really really slow. I don't know who's hosting bacdesigns.biz/ but they're slow.)

Anyways, several things.

1) All the forum sections/posts are hidden.
2) It appears that we are going to have to re-register??
2) a) This can be avoided by doing a database export and import onto the new forums... Glad to see we're getting new forums, I like phpBB.


Also, instead of doing a blind screen (making the page that the forums are on just show driftcrown.com, I would suggest doing either a MOD Rewrite, or doing a masked folder/alias, or a forwarded subdomain so that the end user sees this:

forums.driftcrown.com or
driftcrown.com/forums and it simply points them to

bacdesigns.biz/DriftCrown/forum

but they always know to type in forums.driftcrown.com or driftcrown.com/forums

Just a few pointers / suggestions.
Back to top Go down
View user profile
kmfdmk



Posts : 3
Join date : 2012-02-22
Location : Tigard, OR

PostSubject: Re: Rusty - 1985 Supra Turbo   Fri Feb 24, 2012 3:30 am

Oh... and the default restrictions on here are a PITA, thank goodness we're switching over to phpBB.

I had to re-edit my post about 6 times to get it to post since "New members aren't allowed to post external links for the first seven days."
Back to top Go down
View user profile
Scoupe



Posts : 24
Join date : 2011-09-21
Location : salem, Or

PostSubject: Re: Rusty - 1985 Supra Turbo   Fri Mar 23, 2012 6:26 pm

Welcome
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Rusty - 1985 Supra Turbo   

Back to top Go down
 
Rusty - 1985 Supra Turbo
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» turbo in a box :)
» FOR SALE: Just another turbo buick powered b-body
» Remembering Rusty Jones
» level 10 fiend turbo
» Rusty Nuts?

Permissions in this forum:You cannot reply to topics in this forum
DRIFTCROWN :: Intro's Tell us about yourself, your drift machine etc-
Jump to: